Shop
AD-8922A Remote Controller
The AD-8922A is a remote controller that can be connected to an A&D manufactured weighing instrument using the RS-232C serial interface.
Highlights
Features
Downloads
- Displays weighing data
- Remotely controls a weighing instrument with key operations (no access to the internal settings)
- Outputs weighing data to another external device such as a PC or printer via the RS-232C connection
- Optional BCD, comparator, and analog outputs available
- Can be panel-mounted
Highlights
- Displays weighing data
- Remotely controls a weighing instrument with key operations (no access to the internal settings)
- Outputs weighing data to another external device such as a PC or printer via the RS-232C connection
- Optional BCD, comparator, and analog outputs available
- Can be panel-mounted
Features
| Power supply | AC adapter |
| Power consumption | Approx. 11 VA including the AC adapter (Approx. 1.5 VA for the AD-8922A) |
| Standard interface | RS-232C |
| Baud rate | 600, 1200, 2400, 4800, 9600, 19200 bps |
| Refresh rate | Approx. 10 times/second (when the baud rate is 2400 bps or greater). |
| Applicable connectors | D-Sub 9-pin (Male) to connect to the weighing instrument DIN 8-pin (Female) to connect to an external device |
| Dimensions | 238 (W) × 132 (D) × 170 (H) mm |
| Net weight | Approx. 1.0 kg |
| Standard accessories | AC adapter, communications cable (Approx. 2 m) |
| Weighing instrument | AD-8922 Key | |||||
| ON:OFF | CAL | SAMPLE | MODE | RE-ZERO | ||
| AD-4212C | Turns the weighing instrument display on or off. *1 |
Calibrates using the external mass. |
Switches the minimum display. *2 |
Outputs the received data to an external device. *3 |
Switches the response characteristic. |
Sets the display to zero. |
| GX, GX-K, GP, GH, ET-W, FZ-i |
Calibrates using the internal mass. |
Switches the unit displayed. *4 |
||||
| GR | ||||||
| GF, GF-K, EK-H, AD-4212A/B, HR,HR-i, FX-i |
– | |||||
| EK-i,EW-i | – | – | – | |||
| EK-G, EW-G, FC-i,FC-Si, FG, FG-L,FG-M, FP, FS, FS-KL,HV-G, HV-WP, HW-G,HW-WP |
– | – | – | – | – | |
Note: “-” in the table indicates that the key operation is not available.
*1: Switches between standby and weighing mode on the AD-4212C.
*2: Not applicable to the counting mode and the percent mode. Switching the minimum display is not available for the ET-W.
*3: Available when the AD-8922A is in key mode (“out 1” or “out 2” of the function setting).
*4: Not available for the ET-W and AD-4212
